Brakes/Levers/Pads

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

- Resin brake cable quick-release - Adjustable angle R505T brake shoes - 28mm max tire size - Aluminum body with painted finish - Model Number: BR-R3000 - Series: SORA - Brake Type: New Super SLR Dual pivot - Reach: Short

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Intrinsically designed to function seamlessly with the SL-4700 shift lever, The right braking solutions for every type of rider, comfortable and ergonomic lever profile. - Adjustable reach - Brake cable and housing set included - Compatible with V-brakes, road calipers and road mechanical disc brakes - Adjustable lever reach and transmission ratio - Aluminum construction with anodized finish - Compatible with road bike brakes, v-brakes, and road disc brakes - For handlebar diameter 22.2 mm

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

Shimano's BR-R451 Road Brake Calipers feature a sleek, minimalist design while providing excellent stopping power when you need it. - Compatible with STI and brake levers that are Super SLR enabled (Dura Ace Di2 7970, Dura Ace 7900, Ultegra Di2 6770, Ultegra 6700, 105 5700, Tiagra 4600) - Light action and accurate brake power - Adjustable toe-in brake shoes - Use of these calipers with standard SLR enabled STI and brake levers results in a "mushy" brake response - Brake Lever Actuation: Short Pull Super SLR - Brake Mount Type: Mid Reach Caliper (47mm - 57mm) - Brake Position: Front - Defined Color: Black - Pad Type: Cartridge

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

BL-M6100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-M6100 - Pre-assembled - One-way bleeding system - Superior modulation gives you the power you need at low weight - Quick piston retraction - Lightweight 2-piston disc brake caliper - ICE TECHNOLOGIES - Without rotor and adapter

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Spring included

Magura type 3. 1 performance pads for louise 2002-6 and louise fr - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical downhill stretches - Longer lasting than D-type pads - Spring included Model Compatibility: Shimano BR-M9120, BR-M8120, BR-M8020, BR-M7120, BR-M820, BR-M810, BR-M640, BR-MT520

2-Piston MTB SM-BH90 with short silver banjo fitting, 2000mm, w/connecting unit, w/o banjo bolt

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: SRAM: - HRD - eTap HRD - Level Ultimate,TLM

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Avid: - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM: - Guide Ultimate,RSC,RS,R,T