Parts

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

64BCD chainring for MTB cranksets

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Alivio M3100 series shifters - 2x9 and 3x9 options enable a variety of riding styles - 2-speed front shifter uses single-paddle Rapidfire Plus Mono technology for the most simple & intuitive front shifting - Rapidfire Plus rear shifter mechanism allows up to 3 downshifts at once - Easy to read optical gear display - Optislick cables included - Pairs of shifters also include SP-41 cable housing

Claris HG50 cassettes ensure a durable and low maintenance system that's easy-to-operate, with accurate and light-action shifting for Shimano 8-speed drivetrains. - Nickel plated finish for corrosion resistance - Steel lock ring - MODEL NO: CS-HG50-8 - SERIES: SHIMANO CLARIS R2000 Series - Compatible chain: CN-HG71 - Speeds: 8-speed - Type: HG

- Tubeless Valve compatible with Stan's ZTR rim - Sold as a pair

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

Seatpost lever and cable set for Giant's Contact Switch Seatpost

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

- Ultimate XC Racing tire with lots of speed and grip - Well suited for a variety of riding conditions. - Fast accelerating, hard-pack cross-country tire - Numerous knobs provide multiple contact points with the ground

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

- Resin brake cable quick-release - Adjustable angle R505T brake shoes - 28mm max tire size - Aluminum body with painted finish - Model Number: BR-R3000 - Series: SORA - Brake Type: New Super SLR Dual pivot - Reach: Short

WeThePeople's Compact Mid Bottom Bracket uses high-quality precision sealed bearings for use with Mid-size bottom bracket shells. It includes their own 6061 alloy tube spacer and comes with a selection of spacers to help you dial in your drivetrain.

Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed

When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Pressfit Model: • For use on BB86/92 bottom bracket shells • Compatible with 24mm spindle Hollowtech II cranksets • BB Shell Width (mm): 92 mm • BB/Frame Interface: BB86 , BB92 • Bottom Bracket Shell I.D.: 41 • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II Threaded Model: • Includes 3 x 2.5mm spacers • Includes TL-FC24 adapter tool • Reduced size for light weight • New seal construction for smoother rotation • Requires TL-FC34 or included TL-FC24 adaptor for installation & removal • BB Shell Width (mm): 68 mm • BB/Frame Interface: English • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II • Weight: 77 g

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel